Kingston 8GB 1X8Gb DDR4 SODIMM 2666Mhz CL19 1.2V Unbuffered ValueRam

KingstonSKU: KVR26S19S8/8

Availability:

❌ Back Order - Contact Us for ETA

Price:
Sale price$53.00
Contact Us for ETA

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Description

Overview


KVR26S19S8/8
8GB 1Rx8 1G x 64-Bit PC4-2666
CL19 260-Pin SODIMM


This document describes ValueRAM's KVR26S19S8/8 is a 1G x 64-bit (8GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:


Features

• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.18” (30.00mm)
• RoHS Compliant and Halogen-Free


Specifications


CL(IDD)
19 cycles

Row Cycle Time (tRCmin)
45.75ns(min.)

Refresh to Active/Refresh
Command Time (tRFCmin)
350ns(min.)

Row Active Time (tRASmin)
32ns(min.)

Maximum Operating Power
TBD W*

UL Rating
94 V - 0

Operating Temperature
0oC to +85oC

Storage Temperature
-55oC to +100oC






Estimate shipping

You may also like

Recently viewed