QNAP TVS-682-i3-8G 6 Bays NAS + 40TB 4x Seagate 10TB

$4,315.00

Availability: Back Order - Please Call for ETA

SKU - TVS-682-i3-8G + 4 x ST10000VN0008
-
The NAS will be upgraded and synchronised before ship. Please contact us if you have any set-up preference.
-

The TVS-682 features advanced hardware by adopting 6th Generation Intel® 14nm multi-core processors and was designed around the concept of tiered storage, application-based partitioning and network traffic distribution. Featuring PCIe Gen.3 slots that can support 10GbE/40GbE NIC, PCIe NVMe SSD, graphics cards, and USB 3.1 expansion cards, the TVS-682 also supports smooth 4K @30Hz video transfer, cross-platform file sharing, comprehensive backup and disaster recovery, iSCSI & virtualization and more business applications. Incorporating reliability and security, the TVS-682 presents an ideal choice for a complete business-ready storage solution.

6th Generation Intel® processors, extraordinary performance

The TVS-682 is powered by high-performance 6th Generation Intel® multi-core processors with options including Pentium® and Core™ i3, increasing system performance by 20% - 30% compared with previous generations. It greatly enhances the efficiency of CPU-demanding applications such as virtualization, real-time 4K @30Hz video playback, and serving large numbers of simultaneous connections.

Advanced hardware for greater efficiency

High-performance hardware, well-designed application functionalities and thoroughly-planned usage scenarios are three distinctive cornerstones for achieving optimum performance.

Ordering P/N TVS-682-PT-8G
TVS-682-i3-8G
CPU TVS-682-PT-8G: Intel® Pentium® G4400 3.3 GHz dual-core processor
TVS-682-i3-8G: Intel® Core™ i3-6100 3.7 GHz dual-core processor
System memory Total DIMM slots: 4
Maximum memory: 64 GB (16 GB x4)
Memory modules pre-installed: 8 GB DDR4 RAM (4 GB x 2)
Note: The pre-installed memory modules need to be replaced when expanding the memory to over 24 GB.
Flash Memory 512MB DOM
M.2 Slot 2 x M.2 2242/2260/2280/22110 SATA 6Gb/s SSD
Note:
1. The M.2 SSD is not included as standard.
2. M.2 SSD operations can easily generate excessive heat. It is recommended to install a heatsink (from QNAP or a third-party provider) on the M.2 SSD.
Hard Drive Tray 2 x 2.5” SSD
4 x 2.5”/3.5” hard drive or SSD
Drive Interface SATA 6Gbps/3Gbps; Hot-swappable
USB 1 x USB 3.0 port (Front)
4 x USB 3.0 port (Rear)
LAN Port 4 x GbE port (10GbE and 40GbE are supported with the purchase and installation of compatible network adapters)
Note:
1. For a list of compatible network adapters, please visit the Compatibility List.
2. For instructions on how to install network adapters, please refer to Chapter 6 of the QNAP NAS Hardware Manual.
HDMI Output 3
Audio Input Audio In: 2 x 6.3mm MIC In
Audio Output 2 x built-in speaker, 1 x 3.5mm Line-out jack
Note: Only one of the above audio output ports can work at a time. If a speaker is connected, the sound will output through the speaker.
LED Indicators System status, 2.5” SSD, M.2 SSD, 3.5” HDD
Buttons System: Power button, Reset button, USB one-touch-backup button
System Warning Buzzer
Form Factor Tower
Dimensions 231.9 (H) x 224.9 (W) x 319.8 (D) mm
9.1 (H) x 8.9 (W) x 12.6 (D) inch
Weight Net (NAS only): 7.7 kg/ 16.96lb
Gross (with packing and accessories): 9.5 kg/ 20.94lb
Sound Level (dB)* Sound pressure (LpAm) (bystander position): 20.5 dB
(with 4 x Seagate ST2000VN000-1HJ164 hard drive installed)
Temperature 0-40˚C
Relative Humidity 5~95% non-condensing, wet bulb: 27˚C
Power Supply Input: 100-240V~, 3-1.5A, 60-50Hz; Output: 250W
PCIe Slot 2 (1* PCIe Gen3 x16; 1* PCIe Gen3 x4)
Fan System: 1 x 8 cm cooling fan
CPU: 1 x 9 cm fan

Front

1. SSD LEDs 5. Status LED
2. M.2 LEDs 6. USB One Touch Copy LED
3. Drive LEDs 7. USB 3.0 One Touch Copy port
4. Power button 8. USB One Touch Copy button

Rear

1. PCIe 3.0 x4 (slot 2) 8. Gigabit RJ45 Ethernet ports
2. PCIe 3.0 x16 (slot 1) 9. HDMI ports
3. Speaker 10. Kensington security slot
4. USB 3.0 ports 11. Reset button
5. Console port 12. System fan
6. 6.3 mm microphone jacks 13. Power switch
7. 3.5 mm speaker jack 14. Power port

 
Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory slot, use QNAP modules with identical specifications.
Warning: Using unsupported modules may degrade performance, cause errors, or prevent the operating system from starting.

* Sound Level Test Environment:
Refer to ISO 7779 ; Maximum HDD loaded ; Bystander Position ; Average data from 1 meter in front of operating NAS.
Designs and specifications are subject to change without notice.
More Information
Price $4,315.00
Condition Brand New
Manufacturer QNAP
Availability Back Order - Please Call for ETA
Hard Drive Capacity 40TB
Number of Bays 6 Bays
System Memory 8GB
Memory Expandable Yes
Form Factor Tower
Connections HDMI, Optional 10GbE, Optional 40GbE
Internal HDD Interface 3.5" SATA, 2.5" SATA
NAS Model TVS-682
Warranty 2 Years
Write Your Own Review
You're reviewing:QNAP TVS-682-i3-8G 6 Bays NAS + 40TB 4x Seagate 10TB
Your Rating