SHURE MXWAPX4 Access Point Transceiver w/ 4 Audio Channels

SHURESKU: MXWAPX4=-Z11

Availability:

🚚 In Stock at Supplier (ETA: Usually in 1-3 Business Days)

Pickup available at PC LAN Store

1-3 Business Days

Price:
Sale price$4,596.00
1

Estimate shipping

Description

SHURE MXWAPX4 Access Point Transceiver w/ 4 Audio Channels

  • Analog, Dante, and USB-C audio connections.
  • Built-in IntelliMix DSP audio processing with automatic mixing, echo cancellation, noise reduction, automatic gain control, and EQ.
  • Automatic Frequency Management scans the spectrum, selects a clear channel, and automatically changes channels if interference is expected.
  • Power to the unit (via PoE) and Dante digital networked audio are both supplied over a single Ethernet cable to simplify installation.
  • Dual RJ45 connection enable 3 network operation modes - Switched, Split, or Redundant.
  • The supplied mounting plate and paintable cover allow discreet placement on the ceiling or wall in boardrooms and conference rooms where low visibility is preferred.
  • Two-way wireless transmission allows for remote control of audio and transmission of a secondary program audio to each transmitter.
  • Multiple units can be combined to support configurations of up to 40 compatible channels and 80 in Europe and select countries (double in HD mode).
  • Supports standards-based security protocols to manage access and protect data, including 802.1x, secure boot/storage, and AES encryption for wired and wireless control and audio data.
  • Selectable RF output power to allow optimize spectrum usage by selecting the appropriate wireless output power for the desired operating range.
  • Diagnostic LEDs offer easy visual reference to system activity and indicate power, wireless connection, and network audio status.
  • A CUI can be accessed on a PC connected to the same network enabling access to all device properties for optimization and user specific settings.

 

In the Box

  • MXWAPX4
  • Mounting Plate
  • Quick-Start Guide
  • Audio Connectors

 

Working Range 45 m (150 ft) Outdoor and line-of-sight between user and MXWAPX. Actual range depends on RF power setting, signal absorption, reflections, and interference.
Audio Frequency Response 30 Hz ‒ 19 kHz (+0.5dB/3dB) Dependent on microphone type and audio output. Microphone transducers not included in measurement. MXWAPX set to Direct Mode.
Digital Audio Processing 24 bit / 48 kHz
Digital Audio Networking Dante, AES67
Security AES-256 Encryption Dante and DECT over-the-air
Latency 18 ms (nominal) MXW1/2/6/8X microphone input to MXWAPX output. MXWAPX set to SD RF density mode. Latency depends on output port and RF density mode.
System Audio Polarity Positive pressure on MXW1X/2X/6X/8X microphone diaphragm produces positive voltage on + pin (with respect to - pin) of MXWAPX analog output and a positive digital signal on the MXWAPX USB and Dante outputs.
Radio Transmission Time Division Multiple Access (TDMA), Gaussian Frequency Shift Keying (GFSK), 365 kHz max. deviation
DECT RF Sensitivity < -90 dBm
DECT RF Transmission Power RF Power: Low 2 dBm; 2 mW RF Power: Medium 9 dBm; 8 mW RF Power: High 16 dBm (Egypt: 12 dBm); 40 mW (Egypt: 16 dBm) RF Power: Maximum 21 dBm (Egypt: 15 dBm); 125 mW (Egypt: 32 mW)
Cable Requirements Cat 5e or higher, shielded, 100 m maximum between network devices
Analog Outputs Line Level Output +17 dBV Aux Level Output +6 dBV Mic Level Output -13 dBV
Frequency Response 20 Hz ‒ 22 kHz (+0.5 dB / -3 dB)
Power 37V ‒ 57V, 12.95 W PoE Class 3
Network Interface Dual ‒ RJ45: Gigabit Ethernet, Dante digital audio
Antenna Type Internal Shure Custom PIFA

 

You may also like

Recently viewed