Description
CyberPower OLS10000ERT6UM is a high-performance UPS featuring online
double-conversion topology, which provides seamless pure sine wave power for
mission-critical devices such as NAS and servers, DVRs/surveillance systems,
transportation and infrastructure, and emergency systems. It’s typically
integrated in the back office, server room, and data center environment.
By manually setting the UPS to ECO Mode, the UPS automatically detects the
input power quality and discerns whether it should operate in Line Mode or ECO
Mode. Under poor power conditions, the UPS will run in Line Mode, which
guarantees the highest level of protection and the best possible power quality.
When the input power quality is acceptable, the UPS switches to ECO Mode, which
increases the total output power efficiency by up to 96%.
The product is
equipped with a Maintenance Bypass Switch. By flipping the switch, the power
supply is safely transferred to utility. This allows service personnel to carry
out fast on-site maintenance without having to shut down any connected
equipment.
FEATURES
Online (Double Conversion) UPS Topology
Energy
Saving Technology
UPS Parallel Expansion
Generator Compatible
Overload
Protection
Maintenance Bypass Switch
Zero Transfer Time
Smart Battery
Management (SBM)
Extended Battery Module (EBM)
Surge and Spike Protection
EMI and RFI Filtration
LCD Status Display
Emergency Power Off (EPO) Port
PowerPanel® Management Software
SNMP/ HTTP Remote Management Capability
Rack/ Tower Convertible Configurations
SPECIFICATIONS
GENERAL
Phase
Single Phase
UPS Topology
Online Double Conversion
Energy
Saving Technology
Online ECO Mode Efficiency > 96%
Active PFC
Compatibility
Yes
Parallel Expansion (Max. Units)
4
INPUT
Generator Compatibility
Yes
Nominal Input Voltage (Vac)
230
Input Voltage Range (Vac)
110 ~ 276
Adjustable Voltage Range (Vac)
0~80% Load for 110 ~ 276 Vac
0~100% Load for 176 ~ 276 Vac
Input Frequency
(Hz)
50 ± 5
60 ± 6
Input Frequency Detection
Auto-sensing
Rated
Input Current (A)
45.5
Input Power Factor
0.99
Input Connector Type
Hardwire Terminal Block
OUTPUT
Capacity (VA)
10000
Capacity
(Watts)
9000
On Battery Waveform
Pure Sine Wave
On Battery
Voltage(s) (Vac)
208 ± 1%
220 ± 1%
230 ± 1%
240 ± 1%
Output
Voltage Setting
Configurable
On Battery Frequency (Hz)
50 ± 0.1%
60
± 0.1%
Output Frequency Setting
Configurable
Power Factor
0.9
ECO
Mode Voltage Tolerance
± 10 %
Overload Protection
Internal Current
Limiting , Circuit Breaker , Fuse
Overload Protection (Line Mode)
105~125%
Load for 10 min, 125~150% Load for 1 min, 150~170% Load for 10 sec, >170% Load
for 1 sec
Overload Protection (Battery Mode)
105~125% Load for 2 min,
125~150% Load for 30 sec, >150% Load for 1 sec
Overload Protection (Bypass
Mode)
125~150% Load for 1 min, 150~170% Load for 10 sec, >170% Load for 1 sec
Crest Factor
3 : 1
Harmonic Distortion (Linear Load)
THD<2%
Harmonic
Distortion (Non-linear Load)
THD<5%
Internal Bypass
Automatic Bypass
Maintenance Bypass
Yes
Outlet(s) - Total
1
Outlet Type
Hardwire
Terminal Block x 1
Typical Transfer Time (ms)
0
BATTERY
Runtime at Half Load (min)
11
Runtime at Full Load (min)
4
Typical
Recharge Time (Hours)
7
Maximum Charging Current (A)
4
Start On
Battery
Yes
Smart Battery Management (SBM)
Yes
User-replaceable
No
Battery Type
Sealed Lead-acid
Single Battery Capacity (AH)
12 V 9
AH
Extended Battery Module (EBM)
BPSE240V75ART3UOA
Max. EBM Quantity
(pcs)
15
SURGE PROTECTION & FILTERING
Surge Suppression
(Joules)
445
EMI/RFI Filtration
Yes
MANAGEMENT & COMMUNICATIONS
LCD Panel
Yes
LCD Information Display
Operation Type , Power
Status , Battery Status , Load Status , Fault & Warning , Other Information ,
Event & Log
LCD Setting & Control
Mode Setting , Alarm Setting , Input &
Output , Battery Setting , Fault & Warning , Communication , Event & Log ,
Security Setting
LED Indicators
Line Mode , Battery Mode , Bypass Mode ,
UPS Fault
HID Compliant USB Port(s)
1
Serial Port
RS232
Dry
Contact (with Relay)
Optional
Emergency Power Off (EPO) Port
Yes
Audible Alarms
Battery Mode , Low Battery , Overload , Overcharge , Overheat
, UPS Fault
Management Cable (pcs)
USB Cable x1
Power Management
Software
PowerPanel® Business Edition
SNMP / HTTP Remote Monitoring
Yes
- with optional RMCARD205
PHYSICAL
Form Factor
Rack/Tower
Enclosure Construction
Metal
Color
Black
Rackmount Rail
Yes
Rackmount Ears
Yes
PHYSICAL SIZE - POWER MODULE
Dimensions
(WxHxD) (in.)
17.24 x 5.14 x 26.77
Dimensions (WxHxD) (mm.)
438 x 130.5
x 680
Weight (lbs.)
44.1
Weight (kg.)
20
Installed Rack Height
(U)
3
PHYSICAL SIZE - BATTERY MODULE
Dimensions (WxHxD) (in.)
17.24 x 5.14 x 26.77
Dimensions (WxHxD) (mm.)
438 x 130.5 x 680
Weight
(lbs.)
145.5
Weight (kg.)
66
Installed Rack Height (U)
3
SHIPPING DIMENSIONS
Dimensions (WxHxD) (in.)
22.6 x 28.7 x 35
Dimensions (WxHxD) (mm.)
575 x 730 x 890
Weight (lbs.)
260.7
Weight
(kg.)
118.24
ENVIRONMENTAL
Operating Temperature (°F)
32 ~
104
Operating Temperature (°C)
0 ~ 40
Operating Relative Humidity
(Non-condensing) (%)
0 ~ 90
Operating Elevation (feet/meters)
≤1000,
Load Derated 1% per 100m from 1000m and 2000m
Storage Temperature (°F)
5 ~
113
Storage Temperature (°C)
-15 ~ 45
Storage Relative Humidity
(Non-condensing) (%)
0 ~ 95
Storage Elevation (feet/meters)
0-50,000
feet (0-15,000 meters)
Online Thermal Dissipation (BTU/hr)
2672
Audible
Noise at 1.5M from Surface of Unit (dBA)
60
CERTIFICATIONS
Certifications
CE
RoHS
Yes
WARRANTY
Product Warranty
Period (Year) 2
Battery Warranty Period (Year) 2